|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
High Performance Class-D Speaker Amplifier Series 20W+20W Class-D Speaker Amplifier for Analog Input BD5424EFS No.09075EAT04 Overview BD5424EFS is a 20W + 20W stereo class-D power amplifier IC, developed for space-saving and low heat-generation applications such as low-profile TV sets. The IC employs state-of-the-art Bipolar, CMOS, and DMOS (BCD) process technology that eliminates turn-on resistance in the output power stage and internal loss due to line resistances up to an ultimate level. With this technology, the IC has achieved high efficiency of 91% (10W + 10W output with 8 load), which is the top class in the industry. The IC, in addition, employs a compact back-surface heat radiation type power package to achieve low power consumption and low heat generation and eliminates necessity of installing an external radiator, up to a total output of 40W. This product satisfies both needs for drastic downsizing, low-profile structures and powerful, high-quality playback of the sound system. Features 1) A high efficiency of 91% (10W + 10W output with 8 load), which is the highest grade in the industry and low heat-generation. 2) An output of 20W + 20W (17V, with 8 load) is allowed without an external heat radiator. 3) Driving a lowest rating load of 3.6 is allowed. 4) Pop noise upon turning power on/off and power interruption has been reduced. 5) High-quality audio muting is implemented by soft-switching technology. 6) An output power limiter function limits excessive output to speakers. 7) High-reliability design provided with built-in protection circuits against high temperatures, against VCC shorting and GND shorting, against reduced-voltage, and against applying DC voltage to speaker. 8) A master/slave function allowing synchronization of multiple devices reduces beat noises. 9) Adjustment of internal PWM sampling clock frequencies (350kHz to 500kHz) allows easy protective measures against unwanted radio emission to AM radio band. 10) A compact back-surface heat radiation type power package is employed. HTSSOP-A44(5mm x 7.5mm x 1.0mm, pitch 0.8mm) www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 1/17 2009.06 - Rev.A BD5424EFS Technical Note Absolute Maximum Ratings A circuit must be designed and evaluated not to exceed absolute maximum rating in any cases and even momentarily, to prevent reduction in functional performances and thermal destruction of a semiconductor product and secure useful life and reliability. The following values assume Ta =25. For latest values, refer to delivery specifications. Symbol Rating Unit Conditions Item +20 Supply voltage VCC V Pin 7, 8, 15, 16, 29, 30, 37, 38, 40 (Note 1, 2) 2.0 Power dissipation Input voltage for signal pin Input voltage for control pin Input voltage for clock pin Operating temperature range Storage temperature range Maximum junction temperature Pd VIN VCONT VOSC Topr Tstg Tjmax 4.5 -0.2 +7.2 -0.2 Vcc+0.2 -0.2 +7.2 -40 +85 -55 +150 +150 W W V V V (Note 3) (Note 4) Pin 1, 44 (Note 1) Pin 20, 24 (Note 1) Pin 23 (Note 1) (Note 1) A voltage that can be applied with reference to GND (pins 11, 12, 33, 34, and 43) (Note 2) Pd and Tjmax=150 must not be exceeded. (Note 3) 70mm x 70mm x 1.6mm FR4 One-sided glass epoxy board (Back copper foil 0%) installed. If used under Ta=25 or higher, reduce 16mW for increase of every 1. The board is provided with thermal via. (Note 4) 70mm x 70mm x 1.6mm FR4 Both-sided glass epoxy board (Back copper foil 100%) installed. If used under Ta=25 or higher, reduce 36mW for increase of every 1. The board is provided with thermal via. Operating Conditions The following values assume Ta =25. Check for latest values in delivery specifications. Symbol Rating Unit Item Supply voltage Minimum load resistance (Note 5) Pd should not be exceeded. Conditions VCC RL +10 +18 3.6 V Pin 7, 8, 15, 16, 29, 30, 37, 38, 40 (Note 5) Electrical Characteristics Except otherwise specified Ta = 25, VCC = 12V, fIN = 1kHz, Rg = 0, RL = 8, MUTEX="H", MS="L", SDX="H". For latest values, refer to delivery specifications. Representative Item Symbol Unit Conditions value Whole circuit Circuit current 1 (Sampling mode) Circuit current 2 (Muting mode) Control circuit "H" level input voltage "L" level input voltage Audio circuit Voltage gain Maximum output power 1 (Note 6) Maximum output power 2 (Note 6) Total harmonic distortion (Note 6) Crosstalk Output noise voltage (Sampling mode) Residual noise voltage (Muting mode) Mute Attenuation Internal sampling clock frequency GV PO1 PO2 THD CT VNO VNOM Gvm FOSC 28 10 20 0.1 85 80 35 98 350 dB W W % dB Vrms Vrms dB kHz PO = 1W THD+N = 10% Vcc=17V, THD+N = 10% PO = 1W, BW=20Hz20kHz PO = 1W, Rg = 0, BW = IHF-A Rg = 0, BW = IHF-A Rg = 0, BW = IHF-A, MUTEX = "L" Po =1W, BW =IHF-A, MUTEX = "L" MS = "L" (In master operation) VIH VIL 2.312 00.8 V V SDX, MUTEX, MS SDX, MUTEX, MS ICC1 ICC2 30 12 mA mA With no signal MUTEX = "L" (Note 6) The rated values of items above indicate average performances of the device, which largely depend on circuit layouts, components, and power supplies. The reference values are those applicable to the device and components directly installed on a board specified by us. www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 2/17 2009.06 - Rev.A BD5424EFS Electrical characteristic curves (Reference data) (1) Under Stereo OperationRL=8 100 10 THD+N (%) 1 0.1 0.01 0.001 0.01 0.1 1 10 100 Vcc=12V RL=8 BW=2020kHz 6kHz Technical Note 100 10 THD+N (%) 1 0.1 0.01 10 100 1000 FREQUENCY (Hz) Fig. 1 THD+N Output power Fig. 2 THD+N Frequency 0 -20 Vcc=12V RL=8 Po=1W BW=2020kHz Vcc=12V RL=8 Po=1W BW=2020kHz 1kHz 100Hz OUTPUT POWER (W) 10000 100000 40 35 VOLTAGE GAIN (dB) CROSSTALK (dB) 30 25 20 15 10 5 0 10 100 1000 FREQUENCY (Hz) 10000 100000 Vcc=12V RL=8 Po=1W L=33H C=0.47F C=0.1F -40 -60 -80 -100 10 100 1000 10000 100000 FREQUENCY (Hz) Fig. 3 Voltage gain - Frequency Fig. 4 Crosstalk - Frequency 0 OUTPUT POWER (W) CROSSTALK (dB) -20 -40 -60 -80 -100 0.001 Vcc=12V RL=8 fin=1kHz BW=2020kHz 25 20 15 10 5 0 THD=1% RL=8 fin=1kHz THD=10% 0.01 0.1 1 10 100 8 10 12 14 VCC (V) 16 18 20 OUTPUT POWER (W) Fig. 5 Crosstalk - Output power Fig. 6 Output power - Power supply voltage www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 3/17 2009.06 - Rev.A BD5424EFS Electrical characteristic curves (Reference data) - Continued Technical Note 100 90 80 70 60 50 40 30 20 10 0 0 5 10 Vcc=10V RL=8 fin=1kHz 100 90 80 70 60 50 40 30 20 10 0 0 5 10 EFFICIENCY (%) EFFICIENCY (%) Vcc=12V RL=8 fin=1kHz 15 20 15 20 OUTPUT POWER (W/ch) OUTPUT POWER (W/ch) Fig. 7 Efficiency - Output power Fig. 8 Efficiency - Output power 100 90 80 70 60 50 40 30 20 10 0 0 5 10 15 3 Vcc=18V 2 Vcc=18V RL=8 fin=1kHz EFFICIENCY (%) Vcc=12V Vcc=10V ICC (A) 1 RL=8 fin=1kHz 0 20 25 0 5 10 15 20 25 30 35 40 45 50 TOTAL OUTPUT POWER (W) OUTPUT POWER (W/ch) Fig. 9 Efficiency - Output power Fig. 10 Current consumption - Output power 100 90 80 70 60 50 40 30 20 10 0 8 0 NOISE FFT (dBV) RL=8 Without signal Sampling -20 -40 -60 -80 -100 -120 -140 ICC (mA) Vcc=12V RL=8 Without signal BW=2020kHz Mute 10 12 14 VCC (V) 16 18 10 100 1000 10000 100000 FREQUENCY (Hz) Fig. 12 FFT of Output Noise Voltage Fig. 11 Current consumption - Power supply voltage www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 4/17 2009.06 - Rev.A BD5424EFS Electrical characteristic curves (Reference data) - Continued Technical Note MUTEX Pin 20 10V/div TM Pin 26 5V/div Vcc=12V MUTEX Pin 20 RL =8 Po=500m W fin=500Hz TM Pin 26 10V/div 5V/div Vcc=12V RL =8 Po=500mW fin=500Hz Speaker output 2V/div 10msec/div Speaker output 2V/div 10msec/div Fig. 13 Wave form when Releasing Soft-mute Fig. 14 Wave form when Activating Soft-mute VCCA VHOLD Pin 27 TM Pin 26 5V/div VCCA Vcc=12V RL =8 Po=500mW TM fin=3kHz Pin 26 VHOLD Pin 27 5V/div Vcc=12V RL =8 Po=500mW fin=3kHz 5V/div 5V/div Speaker output 2V/div Speaker output 2msec/div 2V/div 20msec/div Fig. 15 Wave form on Instantaneous Power Interruption (20msec / div) Fig. 16 Wave form on Instantaneous Power Interruption (2msec / div) Soft Clip 5V/div Speaker output Soft Clip 200sec/div Vcc=12V RL =8 Po=5W THD+n=10% fin=1kHz R2=91k R3=22k Fig. 17 Wave form on Output Power Limiter function (Po = 5W) www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 5/17 2009.06 - Rev.A BD5424EFS Electrical characteristic curves (Reference data) - Continued (2)Under Stereo OperationRL=6 Technical Note 30 OUTPUT POWER (W) 25 20 15 10 5 0 8 10 12 14 VCC (V) Fig. 18 Output power - Power supply voltage RL=6 fin=1kHz THD=10% 16 18 20 100 90 80 70 60 50 40 30 20 10 0 0 5 10 15 Vcc=10V RL=6 fin=1kHz 100 90 80 70 60 50 40 30 20 10 0 0 5 10 15 EFFICIENCY (%) EFFICIENCY (%) Vcc=12V RL=6 fin=1kHz 20 25 20 25 OUTPUT POWER (W/ch) Fig. 19 Efficiency - Output power OUTPUT POWER (W/ch) Fig. 20 Efficiency - Output power 100 90 80 70 60 50 40 30 20 10 0 0 5 10 15 20 4 3 ICC (A) Vcc=10V 2 1 0 25 30 Vcc=18V Vcc=12V EFFICIENCY (%) Vcc=18V RL=6 fin=1kHz RL=6 fin=1kHz 0 5 10 15 20 25 30 35 40 45 50 55 60 TOTAL OUTPUT POWER (W) OUTPUT POWER (W/ch) Fig. 21 Efficiency - Output power Fig. 22 Current consumption - Output power Dotted lines of the graphs indicate continuous output power to be obtained on musical signal source or by installing additional heat sinks. www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 6/17 2009.06 - Rev.A BD5424EFS Electrical characteristic curves (Reference data) - Continued (3)Under Stereo OperationRL=4 Technical Note 30 OUTPUT POWER (W) 25 20 15 10 5 0 8 10 12 14 16 18 VCC (V) Fig. 23 Output power - Power supply voltage RL=4 fin=1kHz THD=10% 100 90 80 70 60 50 40 30 20 10 0 0 5 10 Vcc=10V RL=4 fin=1kHz 100 90 80 70 60 50 40 30 20 10 0 0 5 10 EFFICIENCY (%) EFFICIENCY (%) Vcc=12V RL=4 fin=1kHz 15 20 15 20 OUTPUT POWER (W/ch) Fig. 24 Efficiency - Output power OUTPUT POWER (W/ch) Fig. 25 Efficiency - Output power 100 90 80 70 60 50 40 30 20 10 0 0 5 10 15 20 25 6 5 4 ICC (A) 3 2 Vcc=18V RL=4 fin=1kHz EFFICIENCY (%) Vcc=10V Vcc=12V Vcc=18V RL=4 fin=1kHz 1 0 30 35 40 0 10 20 30 40 50 60 70 80 OUTPUT POWER (W/ch) Fig. 26 Efficiency - Output power TOTAL OUTPUT POWER (W) Fig. 27 Current consumption - Output power Dotted lines of the graphs indicate continuous output power to be obtained on musical signal source or by installing additional heat sinks. www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 7/17 2009.06 - Rev.A BD5424EFS Pin Assignment www.rohm.com IN1 1 2 GNDA 3 FIL A PW M 1 PW M 2 FIL P V CCA 4 5 6 7 8 9 DRI VER 1P 10 11 12 13 14 15 16 17 18 ERROR M UTEX SDX 19 20 21 W ARNING ERROR M ute Control 44 IN2 43 GNDA 42 FIL A 41 FIL P 40 V CCA 39 BSP2P 38 V CCP2P 37 V CCP2P 36 OUT2P DRI VER 2P 35 OUT2P 34 GNDP2 33 GNDP2 32 OUT2N DRI VER 1N DRI VER 2N 31 OUT2N 30 V CCP2N 29 V CCP2N 28 BSP2N Protections & Logic Under V ol tage Protection High Temperature Protection Power-off Detector Sof t M ute Ramp Generator SD Control PLM T1 PLM T2 PLM T3 PLM T4 BSP1P V CCP1P V CCP1P OUT1P OUT1P GNDP1 GNDP1 OUT1N OUT1N V CCP1N V CCP1N BSP1N W ARNING Power L imi t (c) 2009 ROHM Co., Ltd. All rights reserved. Outer Dimensions and Inscriptions BD5424EFS Top View Fig. 28 Pin Assignment Diagram Fig. 29 Outer Dimensions and Inscriptions of HTSSOP-A44 Package 8/17 Type N.C. 22 N.C. Lot No. 27 VHOLD 26 TM 25 ROSC Output Short Protection Output DC Vol tage Protection Clock Control 24 M S 23 OSC 2009.06 - Rev.A Technical Note BD5424EFS Explanation of Pin Functions (Provided pin voltages are typical values.) Symbol Pin voltage Pin description No. Technical Note Internal equalizing circuit 1 44 IN1 IN2 3.5V ch1 Analog signal input pin ch2 Analog signal input pin Input audio signal via a capacitor. 2 PLMT1 3.5V Voltage-to-current conversion pin for output power limiter function Connect a register. 3 PLMT2 - Current-to-voltage conversion pin for output power limiter function Connect a register. 4 PLMT3 - Current-to-voltage conversion pin for output power limiter function Connect a register. Bias pin for output power limiter function 5 PLMT4 3.5V Connect a register and a capacitor. www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 9/17 2009.06 - Rev.A BD5424EFS Explanation of Pin Functions - Continued Symbol Pin voltage No. Technical Note Pin description ch1 positive bootstrap pin Connect a capacitor. Internal equalizing circuit 6 BSP1P - 7, 8 VCCP1P Vcc ch1 positive power system power supply pin 9, 10 OUT1P Vcc0V ch1 positive PWM signal output pin Connect with output LPF. 11, 12 GNDP1 0V ch1 power system GND pin 13, 14 OUT1N Vcc0V ch1 negative PWM signal output pin Connect with output LPF. 15, 16 VCCP1N Vcc ch1 negative power system power supply pin 17 BSP1N - ch1 negative bootstrap pin Connect a capacitor. Warning output pin 18 WARNING H: 5V L: 0V Pin to notify operation warning. H: Under warning L: Normal operation Error output pin 19 ERROR H: 5V L: 0V A pin for notifying operation errors. H: Error L: Normal operation Audio mute control pin 20 MUTEX H: Mute off L: Mute on www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 10/17 2009.06 - Rev.A BD5424EFS Explanation of Pin Functions - Continued Symbol Pin voltage No. Technical Note Pin description Internal equalizing circuit Shutdown control pin 21 SDX H: Shutdown off L: Shutdown on 22 N.C. - N.C. pin Nothing is connected with IC internal circuit. Sampling clock signal input/output pin 23 OSC When using two or more sampling clocks, connect via a capacitor. Master/Slave switching pin 24 MS Switching of master/slave functions on a sampling clock signal. H: Slave operation L: Master operation Internal PWM sampling clock frequency setting pin 25 ROSC 5.6V Usually the pin is used open. To adjust an internal sampling clock frequency, connect a resister. Audio muting constant setting pin 26 TM 05V Connect a capacitor. www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 11/17 2009.06 - Rev.A BD5424EFS Explanation of Pin Functions - Continued Symbol Pin voltage No. Technical Note Pin description Internal equalizing circuit Instantaneous power interruption detecting voltage setting pin 27 HOLD 0.68xVcc Connect a capacitor. To adjust a detecting voltage, connect a resister. 28 BSP2N - ch2 negative bootstrap pin Connect a capacitor. 29, 30 VCCP2N Vcc ch2 negative power system power supply pin 31, 32 OUT2N Vcc0V ch2 negative PWM signal output pin Connect an output LPF. 33, 34 GNDP2 0V ch2 power system GND pin 35, 36 OUT2P Vcc0V ch2 positive PWM signal output pin Connect an output LPF. 37, 38 VCCP2P Vcc ch2 positive power system power supply pin 39 BSP2P - ch2 positive bootstrap pin Connect a capacitor. 40 VCCA Vcc Analog system power pin 41 FILP Vcc+35 12 PWM system bias pin Connect a capacitor. www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 12/17 2009.06 - Rev.A BD5424EFS Explanation of Pin Functions - Continued Symbol Pin voltage No. Technical Note Pin description Internal equalizing circuit Analog signal system bias pin 42 FILA 3.5V Connect a capacitor. 43 GNDA 0 Analog system power supply pin www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 13/17 2009.06 - Rev.A BD5424EFS Application Circuit Diagram Vcc=10V18V Technical Note Fig. 30 Circuit Diagram of Stereo Operation with 4 Load www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 14/17 2009.06 - Rev.A BD5424EFS Table 1 BOM List of Stereo Operation with 4 Load Configuration No. Item Part Number Vendor mm 1 2 3 4 5 6 7 8 9 10 11 12 IC C C C C C C C C C C R BD5424EFS GRM21BB31H105KA12 GRM188R11H104KA93 GRM21BB31H154KA88 GRM188B31C105KA92 GRM31MR71H684KA88 GRM21BB31E335KA75 GRM188B11E104KA01 GRM21BB11C105KA GRM21BB31C106KE15 25SVPD10M MCR01MZPF2202 ROHM MURATA MURATA MURATA MURATA MURATA MURATA MURATA MURATA MURATA SANYO ROHM inch 1F 0.1F 0.15F 1F 0.68F 3.3F 0.1F 1F 10F 10F 22k Value Rated voltage 50V 50V 50V 16V 50V 25V 25V 16V 16V 25V 50V Tolerance Temperature characteristics 10% 10% 10% 10% 15% 10% 10% 10% 10% 25% 200ppm/ Quantity Technical Note Reference HTSSOP-A44 2012 1608 2012 1608 3216 2012 1608 2012 2012 6666 1005 0805 0603 0805 0603 1206 0805 0603 0805 0805 2626 0402 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 1% 1 4 5 4 2 2 1 3 1 1 3 3 IC1 C6, C17, C28, C39 C7, C15, C29, C37, C40 C9, C13, C31, C35 C1, C44 C10, C32 C27 C5, C23, C26 C41 C42 C8, C38, C43 R2, R3, R4,R25 Configuration No. Item Part Number Vendor mm 13 L A7502BY-100M TOKO 13x16.0 10H 20% Value Tolerance DC Resistance 30mmax. Rated DC Current 5.09A max. Quantity Reference 4 L9, L13, L31, L35 www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 15/17 2009.06 - Rev.A BD5424EFS Technical Note Notes for use Notes for use 1. About absolute maximum ratings If an applied voltage or an operating temperature exceeds an absolute maximum rating, it may cause destruction of a device. A result of destruction, whether it is short mode or open mode, is not predictable. Therefore, provide a physical safety measure such as fuse, against a special mode that may violate conditions of absolute maximum ratings. 2. About power supply line As return of current regenerated by back EMF of output coil happens, take steps such as putting capacitor between power supply and GND as a electric pathway for the regenerated current. Be sure that there is no problem with each property such as emptied capacity at lower temperature regarding electrolytic capacitor to decide capacity value. If the connected power supply does not have sufficient current absorption capacity, regenerative current will cause the voltage on the power supply line to rise, which combined with the product and its peripheral circuitry may exceed the absolute maximum ratings. It is recommended to implement a physical safety measure such as the insertion of a voltage clamp diode between the power supply and GND pins. 3. Potential of GND (11, 12, 33, 34, and 43 pins) Potential of the GND terminal must be the lowest under any operating conditions. 4. About thermal design Perform thermal design with sufficient margins, in consideration of maximum power dissipation Pd under actual operating conditions. This product has an exposed frame on the back of the package, and it is assumed that the frame is used with measures to improve efficiency of heat dissipation. In addition to front surface of board, provide a heat dissipation pattern as widely as possible on the back also. A class-D power amplifier has heat dissipation efficiency far higher than that of conventional analog power amplifier and generates less heat. However, extra attention must be paid in thermal design so that a power dissipation Pdiss should not exceed the maximum power dissipation Pd. Maximum power dissipation Pd Tjmax - Ta ja W W Power dissipation 1 Pdiss PO - 1 Tjmax: Maximum temperature junction = 150[] Ta: Operating ambient temperature [] ja: Package thermal resistance [/W] Po: Output power [W] : Efficiency 5. About operations in strong electric field Note that the device may malfunction in a strong electric field. 6. Thermal shutdown (TSD) circuit This product is provided with a built-in thermal shutdown circuit. When the thermal shutdown circuit operates, the output transistors are placed under open status. The thermal shutdown circuit is primarily intended to shut down the IC avoiding thermal runaway under abnormal conditions with a chip temperature exceeding Tjmax = 150. 7. About shorting between pins and installation failure Be careful about direction and displacement of an LSI when installing it onto the board. Faulty installation may destroy the LSI when the device is energized. In addition, a foreign matter getting in between LSI pins, pins and power supply, and pins and GND may cause shorting and destruction of the LSI. 8. About power supply startup and shutdown When starting up a power supply, be sure to place the MUTEX pin (pin 20) and SDX pin (pin 21), at "L" level. When shutting down a power supply also, be sure to place the pin at "L" level. Those processes reduce pop noises generated upon turning on and off the power supply. In addition, all power supply pins must be started up and shut down at the same time. 9. About WARNING output pin (pin 18) and ERROR output pin (pin 19) A WARNING flag is output from the WARNING output pin upon operation of the high-temperature protection function and under-voltage protection function. And an ERROR flag is output from the ERROR output pin upon operation of VCC/GND shorting protection function and speaker DC voltage applying protection function. These flags are the function which the condition of this product is shown in. The use which aimed at the protection except for this product is prohibition. 10. About N.C. pins (pin 22) The N.C. (Non connection) pins are not connected with an internal circuit. Leave the pins open or connect them to GND. www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 16/17 2009.06 - Rev.A BD5424EFS Ordering part number Technical Note B Part No BD D 5 Part No. 5424 4 2 4 E F S - E 2 Package EFS: HTSSOP-A44 Packaging and forming specification E2: Embossed tape and reel HTSSOP-A44 18.50.1 (MAX 18.85 include BURR) (6.0) 44 23 +6 4 -4 Tape Quantity 1.00.2 Embossed carrier tape (with dry pack) 1500pcs E2 The direction is the 1pin of product is at the upper left when you hold 9.50.2 7.50.1 0.50.15 Direction of feed (5.0) ( reel on the left hand and you pull out the tape on the right hand ) 1 0.85 1PIN MARK 22 +0.05 0.17 -0.03 S 1.0MAX 0.08 S 0.850.05 0.080.05 0.8 +0.05 0.37 -0.04 0.08 M 1pin (Unit : mm) Reel Direction of feed Order quantity needs to be multiple of the minimum quantity. www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. 17/17 2009.06 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of BD5424EFS |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |